Skip to content
DelrexLocksmith Co. · DelrexOpen 24/7(289) 670-9706Request a visit
DelrexDelrexLOCKSMITH CO.DELREX, ONTARIO
Technician in safety glasses kneeling at a gray commercial door, drilling a steel push bar into place beside an open parts case. — Delrex

Locksmith in Delrex, OntarioSecure the frame,not only the lock

Doors in Delrex usually give at the frame long before the lock fails. A reinforced strike, longer screws into the stud and a properly set deadbolt do more than a new cylinder alone. We look at the whole door edge, then recommend the upgrade that actually raises the bar.

Halton, Ontario

Delrex information

Town
Delrex, Halton, Ontario
In business
15 years
Hours
Open 24/7, same fees any hour
Visits
On-site assessment preferred

2021 census · what it means at the door

  • 46%Homes of every age

    About 46% of homes in Halton Hills were built in 1980 or earlier, according to the 2021 Census.

    Where housing ages are mixed, some homes have never had a deadbolt and others have two. The visit starts with a look at what is already there, and the recommendation might be adding a lock on one house and simply tuning it on the next.

  • 73%Mostly houses

    Single-detached houses make up about 73% of homes in Halton Hills (2021 Census).

    In areas of single houses, the door nobody watches is the side or back entry. It often has the weakest lock on the property. Fitting a proper deadbolt and a reinforced strike there is a modest job that closes the obvious gap.

Source: Statistics Canada, Census Profile

Locksmith services

From lockouts to master keys

One team handles every service on this page for Delrex, so a lockout can turn into a rekey, and a rekey into a properly set deadbolt, within the same visit if you want it. Each service is described separately below, but at the door they fit together as one piece of work.

Delrex

Calls like these

Technician in black gloves holding a screwdriver at the knob lockset of an open dark door, with a tool bag nearby. — Delrex

Home Lockout Service

You stepped out to grab the recycling bin and the door swung shut behind you. Through the glass you can see your keys hanging on the hook by the stairs, exactly where they always are, and the latch has caught.

Home Lockout Service
Steel lever handle lockset with two strike plates, loose screws, a screwdriver and an open box on a wooden bench. — Delrex

Delrex

Sort your Delrex door with one call

After a break-in, households in Delrex need the door secured tonight and the decisions made later. We come out, board or repair what is damaged, replace or rekey anything that might have been compromised, and leave you with a locked house. Conversations about strike plates and better cylinders wait until the shock has passed and you are ready to have them.

— Delrex Locksmith Co.

  • A look before a verdictWe inspect the door, frame and lock before suggesting anything. Diagnosing from the driveway is how people end up with parts they did not need.
  • Two or three real choicesWhere there are sensible alternatives we explain them side by side, including the option of doing less than you expected.
  • The job finished properlyTested, aligned, cleaned up and demonstrated. We do not consider a lock done until you have turned the key yourself.

Hours

  • HoursOpen 24/7
  • Nights and weekendsSame fees
  • In business15 years
  • VisitsOn-site assessment

Open 24/7

How a visit goes

Commercial rekeying changes the pins inside a business's existing lock cylinders so that a new key operates them and every earlier key stops working, while the hardware itself stays on the door. The locksmith works from a list of the openings the business controls and the people who need to pass…

Drawing: a house seen from the street. The van pulls up, the garage door is opened for the work, then it closes level and the porch light comes on.
  1. 1 of 3

    Talking through how you live

    Who comes and goes, whether you want codes or phone access, how the door is used in winter. The answers shape which lock suits you and how it should be set up.

  2. 2 of 3

    Fitting it to the door

    We check the door alignment before mounting anything, because a smart lock needs a door that closes freely. Then we install, wire or pair it and set the first codes with you.

  3. 3 of 3

    Showing you the controls

    We walk through adding and removing codes, changing batteries and what to do if the electronics ever sulk. You leave able to manage it yourself.

Questions we hear most

(289) 670-9706

My lock is a high-security model. Can it still be opened?

Yes. High-security cylinders with security pins, sidebars or restricted keyways are designed to slow an intruder, and they do slow a locksmith too, but they open with the right technique, a decoder made for that keyway, or as a last resort a precise drill through the cylinder followed by a like-for-like replacement. Bring any key card or code card that came with the lock, since restricted keys are cut from those records rather than copied.

Can you also deal with the back door, the roll-up shutter and the gate?

Yes. A business lockout covers every opening the premises relies on: the rear service door with its exit device, a roll-up shutter and its padlock, the compound gate, a mailbox in the lobby and interior doors such as the cash office or server closet. Mention each one when you call so the right padlock shackles, cores and cylinders are in the van, and so cylinders that should share a key are handled together.

They did not get in. Does the door still need attention?

It does, because the force went somewhere. A lock that held against a kick or a bar often leaves a bent strike plate, loosened screws, a gouged door edge and a bolt that now binds where it met the strike under load. Each of those makes the next attempt easier. The visit checks every part that took strain, replaces what bent, reinforces the strike and hinges with long screws, and confirms the bolt throws cleanly, so the door is stronger than the one that was tested.

What do lock grades mean when I am picking a deadbolt?

Residential deadbolts are graded under an industry standard in three categories, security, durability and finish, with letter grades from C through A, so a lock marked with three A grades has met the highest level in each. Heavier commercial-pattern bolts are graded 1, 2 or 3, with 1 the highest. The grades let you match hardware to a busy family door or an exposed side entrance without relying on the weight of the box.

Can a lever replace a knob on the same door?

Yes, and it is a common change for anyone who finds a knob hard to grip. Levers use the same bore and backset as knobs, so the swap is usually a direct fit. Levers are handed, so the locksmith checks which way the door swings and chooses or adjusts the lever accordingly. A keyed entry lever pairs well with a deadbolt above it, and interior passage and privacy levers complete the set.

On-site assessment preferred

Request a visit

Talk to us about access for your staff. Ask about a spare key before you need one.

Delrex Locksmith Co.

Locksmith · Delrex

Open 24/7

(289) 670-9706

15 years in business

Open 24/7 · call(289) 670-9706Request a visit